No Power Output (Inverter Generators)

The information contained in our websites and in our videos are designed for assisting trained Repair Professionals as a guide only and does not replace professional training. By using our information you are agreeing to our T&Cs  and acknowledge that the advice given is a general guide.

This article is designed for Inverter Generators only. Please see our Repair Advice section for other types.

 

The “Ignition Controller CDI” provides fault warnings via the 3 lights on the control panel, and will determine if ignition should take place and if the inverter is functioning correctly. When you try to start the generator by pulling the recoil, take note of which of the lights illuminates.

 

If you have a red overload light, especially if there is no load connected is a certain sign that the "Inverter Module" is faulty

 

If neither the red light nor the green output light illuminates then both the “Ignition Controller CDI” and the "Inverter Module" are faulty

On very rare occasions, it is the stator at fault, if you suspect this, or have replaced the "Inverter Module" with no change, then please contact us

If you need any Parts we sell them on our website.

If you need any further assistance our Engineers are happy to help! Click here to open a support ticket with them.

Did you know...

We spend 1000's of hours every year providing Free Repair Advice. As you can imagine, this does not pay the bills! If you would like to buy us a coffee or leave us a review to say thanks, it will help us continue to be there for you in the future. And...  we would really appreciate it!